Lianyungang advantage freight often see is the container, so the container should pay attention to what matters? Today we lianyungang freight forwarding company to introduce the container packing operation should pay attention to matters!

1. When loading the goods, the weight of the goods inside the container should not exceed the maximum loading capacity of the container under any circumstances. The maximum loading weight of the container is calculated by subtracting the dead weight of the container from the total weight of the container; The total weight and dead weight are generally marked on the door of the container;

2. The unit unit weight of each container is constant. Therefore, when a certain cargo is loaded inside a container, the density of the cargo will enable it to be determined whether it is heavy or light. Goods with a density greater than the unit unit weight of the container are heavy goods, and the loaded goods are calculated by weight. On the contrary, goods with a density less than the unit weight of the container are light goods, and the loaded goods are calculated by volume. It is very important to distinguish these two different cases in time to improve packing efficiency.

3. During loading, the load at the bottom of the box shall be balanced, and the load inside the box shall not be biased at one end or one side, especially the situation where the load center of gravity is biased at one end shall be strictly prohibited;

4, to avoid the production of concentrated load, such as loading heavy machinery and equipment, the bottom of the box should be paved with wood and other padding materials, as far as possible to disperse the load. The safety load of the average unit area of the standard container bottom is roughly as follows: the 20-foot container is 1330x9.8n /m, and the 40-foot container is 980x9.8n /m2.

5. When loading with manpower, please pay attention to whether there are "no upside down", "flat", "vertical" and other loading and unloading instructions on the package. To use the proper means of loading, do not use hand hooks in baling. The contents of the case should be stowed neatly and tightly. Use padding or insert plywood between the goods to prevent the goods from moving in the boxes.

6. When loading pallets and cargoes, it is necessary to know the internal dimensions of containers and the external dimensions of cargo packages, so as to calculate the number of loaded pieces and achieve the purpose of minimizing abandonment and loading more goods;

7. When loading and unloading with fork truck, it will be limited by the free lifting height of machinery and the height of portal frame. If conditions permit, forklift truck can load two layers at a time, but the upper and lower should leave a certain gap.